Carbon monoxide catalyst (cylindrical particles)

Product Introduction:

This product is a mixture of copper oxide (CuO) and manganese dioxide (MnO₂), which oxidizes carbon monoxide (CO) with oxygen in the air at room temperature. It is an excellent catalyst and has black or brown strip-shaped particles and improved spherical shapes. It is suitable for devices that require the removal of carbon monoxide, such as gas masks, mine self rescue devices, and shelters. Hoggart is a carbon monoxide catalyst, commonly known as a carbon monoxide oxidation catalyst. This product is suitable for use in air with an oxygen concentration of not less than 18%, a carbon monoxide concentration of not more than 1%, and no other toxic gases. It is used in conjunction with a desiccant to convert carbon monoxide (CO) into carbon dioxide (CO₂).

Product advantages:

The carbon monoxide catalyst produced by Shandong Yuanlin Guici New Materials Co., Ltd. uses platinum palladium as the active component and introduces a second carrier on the surface of the honeycomb ceramic carrier to evenly disperse the precious metal component on the carrier surface. It can be used to catalyze the reaction of carbon monoxide and oxygen to generate carbon dioxide. This catalyst has the advantages of high catalytic efficiency, wide temperature range for use, and good stability.

1.The advantage of Shandong Yuanlin carbon monoxide catalyst lies in its stable performance, which can still catalyze stably in environments with high water vapor (RH>85%);

2.Carbon monoxide catalyst has good catalytic effect on low concentration CO gas;

3.Compared to traditional hydrophobic CO catalysts, our company’s carbon monoxide catalyst has significant performance and usage advantages.

Application areas:

The carbon monoxide catalyst produced by Shandong Yuanlin Company is mainly used for exhaust gas treatment in industries such as pharmaceuticals and chemicals. It can be used to remove small amounts of carbon monoxide from gases such as petroleum gas, inert gas, oxygen, etc., purify high concentrations of carbon monoxide produced by incomplete combustion of various combustible gases, and achieve the goal of energy reuse; And it is used to purify low concentration carbon monoxide produced by incomplete combustion of various combustible gases to achieve environmental protection goals.

Storage, transportation, and storage requirements:

1.Products used for mining transportation by trains, cars, ships, etc. should not be mixed with corrosive chemical reagents, solvents, and oils during transportation.

2.Handle with care during transportation.

3.After opening the container and using the catalyst, the packaging container should be tightly sealed to prevent the product from absorbing moisture and causing a decrease in quality or failure.

4.The product should be stored in a well ventilated, dry, non corrosive chemical, solvent, and oil free warehouse.

Product shelf life:

In a sealed and dry environment, the product has a shelf life of two years from the date of leaving the factory without being opened.

Matters needing attention:

This product should not be used in the following situations:

1.When the temperature is below -10 degrees, the catalytic reaction slows down or almost stops;

2.When the concentration of carbon monoxide is higher than 1%, the concentration of carbon dioxide produced is also higher than 1%, which is harmful to the human body, and the reaction heat effect is significant, making it difficult for people to tolerate;

3.This product needs to be used in conjunction with a desiccant, otherwise its catalytic performance may be reduced due to water absorption and moisture retention.

Shandong Yuanlin Guici New Materials Co., Ltd. has a large inventory of products and guarantees timely delivery. Generally, orders can be shipped on the same day, with quality assurance and comprehensive after-sales service!